Cleaning Your AIRAID SynthaMax (Non-Oiled) Filter

To clean an AIRAID SynthaMax (Non-Oiled) filter, ensure the entire filter is covered and allow it to soak for approximately 10 minutes, then wash it from the inside out using a low-pressure hose.

Maintaining your vehicle's AIRAID SynthaMax (Non-Oiled) filter is essential for optimal engine performance and air quality. The cleaning process for this specific type of filter is straightforward, focusing on careful soaking and precise rinsing techniques.

Essential Steps for a Thorough Clean

Based on instructional guidelines for the AIRAID SynthaMax (Non-Oiled) filter, the cleaning procedure involves two key stages: preparation for soaking and the rinsing process.

1. Prepare and Soak the Filter:

   • The first step is to ensure that the entire filter is covered. This initial step is crucial for preparing the filter material.
   • Once the filter is fully covered, allow it to soak thoroughly for about 10 minutes. This soaking period is designed to loosen and break down accumulated dirt, dust, and other contaminants from the filter media.

2. Rinse from the Inside Out:

   • Following the soaking duration, take a low-pressure hose for the rinsing phase.
   • It is critical to wash the filter from the inside out. This specific rinsing direction helps to effectively flush out the dislodged contaminants, pushing them away from the clean side of the filter and preventing them from becoming re-embedded within the filter's pleats.

Key Considerations for Optimal Results

To achieve the best possible clean and extend the life of your AIRAID SynthaMax (Non-Oiled) filter, keep these important points in mind:

• Soaking Duration: Adhering to the 10-minute soak time is vital. This allows sufficient time for the cleaning process to work effectively.
• Water Pressure: Always use a low-pressure hose when rinsing. High-pressure water can damage the delicate synthetic filter media, compromising its filtration capabilities.
• Rinsing Direction: The instruction to wash from the inside out is fundamental. This method ensures that debris is pushed out of the filter, promoting a cleaner and more efficient filter element.

Cleaning Process Summary

For a quick reference, here's a summary of the cleaning steps for your AIRAID SynthaMax (Non-Oiled) filter:

By diligently following these instructions, you can effectively clean your AIRAID SynthaMax (Non-Oiled) filter, contributing to sustained performance and filtration efficiency.