Getting air dry clay off plastic involves a simple process of scraping or brushing followed by wetting and wiping.
Air dry clay can sometimes stick to plastic surfaces during crafting or handling. Fortunately, removing it is straightforward, especially when using the right approach based on the clay's state.
Simple Steps for Clay Removal
The most effective method involves physically removing the bulk of the clay first, then cleaning the residue.
Here is a breakdown of the process:
-
Remove Excess Clay: Whether the air dry clay is still wet or has dried onto the plastic, begin by removing as much of the material as possible.
- Scrape or brush off excess dry or wet clay with a plastic paint scraper or soft bristle brush. This initial step helps lift the majority of the clay without potentially scratching the plastic surface, which hard metal scrapers might do.
-
Apply Water: Once the bulk of the clay is removed, tackle any remaining film or stubborn bits.
- Spray the area with water. Water helps to rehydrate the clay residue, making it easier to clean.
-
Wipe Clean: Finish by wiping the surface to remove the hydrated residue.
- Continue to wipe clean with paper towels. The paper towels will absorb the wet clay residue, leaving the plastic surface clean. Repeat spraying water and wiping as needed until all clay is gone.
This method works by combining mechanical removal with the dissolving action of water on air dry clay.
In Summary:
To remove air dry clay from plastic, first scrape or brush off excess clay using a plastic paint scraper or soft bristle brush. Then, spray the area with water and wipe it clean with paper towels.
