zaro

How to Use Simple Green?

Published in Cleaning Instructions 2 mins read

Using Simple Green cleaner generally involves applying the solution, letting it work on tough dirt, scrubbing if necessary, and rinsing the area clean. The exact steps provided for many cleaning tasks are straightforward and effective.

Simple Green Basic Application Steps

Based on the provided guidance, the process for cleaning with Simple Green involves these fundamental steps:

  1. Apply solution.
  2. Leave on heavy soils for 1-2 minutes.
  3. Scrub if needed.
  4. Rinse or damp-wipe with clean water.
  5. Repeat if needed.

Let's break down each step for clarity.

Step-by-Step Cleaning Process

Here is a detailed look at how to utilize Simple Green effectively for general cleaning, following the outlined method:

  1. Apply the Simple Green Solution:

    • Begin by applying the Simple Green cleaner directly to the surface you intend to clean.
    • The method of application (spraying, wiping with a soaked cloth, etc.) may depend on the specific task and surface material. Ensure the area needing cleaning is covered with the solution.
  2. Allow Contact Time on Heavy Soils:

    • For areas with tough or heavy dirt and grime, let the Simple Green solution sit on the surface.
    • Allowing it to dwell for 1 to 2 minutes provides time for the cleaner to penetrate and break down stubborn residues, making them easier to remove.
  3. Scrub as Necessary:

    • If the soil is particularly stubborn or hasn't lifted after the dwell time, additional action may be required.
    • Scrub the affected area using a brush, sponge, or cloth appropriate for the surface. This mechanical action helps lift and loosen the remaining dirt.
  4. Rinse or Damp-Wipe Clean:

    • Once the dirt is loosened or removed, it's crucial to clean the residue away.
    • Rinse the area thoroughly with clean water. For surfaces that cannot be rinsed directly, use a clean cloth dampened with water to damp-wipe the surface, removing the cleaner and lifted dirt.
  5. Repeat for Stubborn Areas:

    • For very tough messes or if some soil remains after the first attempt, the process can be repeated.
    • Repeat steps 1 through 4 as necessary until the surface is clean to your satisfaction.

Following these steps ensures that Simple Green can work effectively to tackle various cleaning challenges, leaving surfaces clean.