Disassembling your ResMed AirTouch F20 mask is straightforward, primarily involving detaching the cushion and potentially the elbow. The most common step, according to documentation for similar ResMed F20 models, is removing the cushion, which easily detaches from the mask frame.
Understanding Your AirTouch F20 Mask Components
Before disassembling, it's helpful to identify the main parts:
- Cushion: The foam part that seals against your face.
- Mask Frame: The structure the cushion attaches to, connecting to the headgear.
- Elbow: The swivel connector where your CPAP tube attaches.
- Headgear: The straps that hold the mask in place.
Disassembly usually involves separating the cushion from the frame and sometimes the elbow from the frame for cleaning or replacement.
Step-by-Step Guide to Disassembling the AirTouch F20 Mask
The primary disassembly step for cleaning or cushion replacement involves removing the cushion from the frame.
-
Remove the Cushion: The AirTouch F20 cushion is designed to be easily detachable from the mask frame. According to instructional material for similar models like the AirFit F20, removing the cushion is as simple as separating it from the frame.
As highlighted in instructions for the AirFit F20, the cushion "Just pops off like this I promise you won't break it."
To do this, gently pull the cushion away from the hard plastic mask frame around its edge. It should detach without excessive force.
-
Detaching the Elbow (Optional): The elbow, which is the quick-release swivel connector, can also usually be detached from the mask frame by pressing the quick-release buttons on the sides of the elbow and pulling it away from the frame.
-
Separating Headgear (Optional): If you need to clean the headgear separately or replace the frame, you can detach the headgear from the frame using the velcro tabs or clips, depending on the specific design.
Reassembly is Just as Easy
Putting your mask back together after cleaning or replacing parts is designed to be just as simple. For the cushion, as the reference notes, when you are done cleaning or putting on a new one, it "just pops right in there" onto the frame. Align the cushion correctly with the frame and gently push it into place until it feels secure.
By following these simple steps, you can effectively disassemble your ResMed AirTouch F20 mask for cleaning and maintenance.
