To put a picture frame up, you typically need to use a tool called a "picture placer" and the wire on the back of the frame.
Using a Picture Placer
Here is a step-by-step guide based on the provided reference:
- Center the Picture Placer: Place the picture placer in the center of your framed artwork.
- Hook the Wire: Hook the wire on the back of the picture frame onto the picture placer.
- Pull Tight: Pull the wire tight. This will secure the tool in place.
Additional Information for Hanging a Picture Frame
While the reference focuses on using a picture placer, here is some additional information that is often relevant to hanging picture frames.
- Determine the Placement: Decide where you want the picture frame to hang on the wall. Consider the height and spacing relative to other objects.
- Mark the Spot: Use a pencil to lightly mark where you want to hang the frame on the wall.
- Choose Hardware: Choose the appropriate hardware for your wall type. Options include:
- Nails for drywall
- Screws and anchors for plaster and drywall
- Specialized hooks for concrete
- Install the Hardware: Install the hardware according to the manufacturer's directions.
- Hang the Frame: Carefully place the wire of the picture frame over the hook or screw installed.
- Check Level: Use a level tool to ensure the frame is straight.
- Adjust if Necessary: If it's not level, make adjustments to the hardware as needed.
