You can easily stick Instax photos to various surfaces like walls, boards, or albums using adhesive tape or dots. This method provides a simple and effective way to display your instant prints.
The Primary Method: Adhesive Tape or Dots
The most common and recommended way to attach your Instax prints is by utilizing adhesives that offer a strong yet manageable bond. This ensures your photos stay securely in place without causing damage to the prints or the surface.
Recommended Adhesives
For sticking Instax photos, the most effective tools are double-sided tape or glue dots. Both offer clean application and strong adhesion suitable for the lightweight nature of polaroid prints.
- Double-Sided Tape: This type of tape has adhesive on both sides, making it ideal for attaching one surface to another discreetly. When using double-sided tape, you should put the tape into the centre of each photo or on its sides for better adhesion. Placing it in multiple spots or along the edges can provide a more secure hold, preventing corners from peeling up over time.
- Glue Dots: These are small, pre-formed dots of adhesive that are clean and easy to apply. They are a popular choice as they offer a strong bond without the mess often associated with liquid glues. Like double-sided tape, you can place multiple glue dots on the back of the print for enhanced stability.
Step-by-Step Guide for Sticking Instax Prints
Follow these simple steps to attach your Instax photos securely:
- Choose Your Adhesive: Select either double-sided tape or glue dots based on your preference and the surface you're attaching to.
- Prepare the Print: Turn your Instax photo over to expose the back.
- Apply Adhesive:
- If using double-sided tape, cut small pieces and apply them to the back of the photo. For optimal adhesion, place a piece in the centre of the photo and/or additional pieces on its sides or corners.
- If using glue dots, peel them off their backing and press them onto the back of the photo in similar strategic locations (centre, corners, or sides).
- Position the Photo: Carefully align the Instax print on your desired surface (e.g., a wall, a cork board, or an album page).
- Press Firmly: Once positioned, press down firmly on the photo for a few seconds to ensure the adhesive creates a strong bond with the surface.
Tips for Best Results
- Clean Surface: Always ensure the surface where you plan to stick the Instax photo is clean, dry, and free of dust or grease. This will significantly improve adhesion.
- Surface Compatibility: While adhesive tape and dots work on many surfaces, consider the texture and material. Smooth, non-porous surfaces generally offer the best bond.
- Removability: If you anticipate needing to remove the photos later without damage, look for "removable" or "repositionable" double-sided tape or glue dots. However, standard strong adhesives might damage the photo or surface upon removal.
- Avoid Liquid Glues: Liquid glues can often warp the Instax prints or leave residue, so it's generally best to avoid them for this purpose.
