To change the number combination on your key safe, you'll typically need to access the internal mechanisms on the back of the number dials or buttons. The exact method varies depending on the key safe model, but here's a general guide:
-
Open the Key Safe: Ensure the key safe is open. You'll need access to the inside of the door or the back panel where the combination mechanism is located.
-
Locate the Reset Mechanism: Look for small switches, levers, or screw heads on the back of the number dials/buttons. These are the mechanisms that control which numbers are part of the combination.
-
Determine the Current Setting: Identify which numbers are currently active in the combination.
-
Set the New Combination:
-
Switches/Levers: For each number you want to include in your new combination, flip the corresponding switch or lever to the "on" or active position. For numbers you don't want in the combination, ensure their switches/levers are in the "off" or inactive position.
-
Screws: Some key safes use screws that need to be turned a certain direction (e.g., using a small screwdriver) to activate or deactivate a number in the combination. Turn the screws associated with the numbers you want in your code to their "on" position or the opposite of their current position.
-
-
Important Considerations:
- Number of Digits: You can usually choose a combination with multiple digits, but it's generally recommended to use no more than six for ease of remembering.
- Record Your Combination: Write down your new combination in a safe place!
- Test Thoroughly: Before closing the key safe, test the new combination several times to ensure it works correctly.
- Consult the Manual: If you still have the key safe's instruction manual, refer to it for specific instructions related to your particular model. If you no longer have the manual, try searching online for the model number followed by "instruction manual" or "user guide".
Example:
Let's say you want to set the combination to 1234. You would:
- Locate the small switches or screws on the back of the number dials.
- Ensure the switches/screws corresponding to the numbers 1, 2, 3, and 4 are in the "on" or active position.
- Ensure the switches/screws for all other numbers (5, 6, 7, 8, 9, 0, etc.) are in the "off" or inactive position.
If you are having difficulty or are unsure about the process, consult the manufacturer's website or contact their customer support for assistance.
