Fixing (installing) a kitchen glass splashback primarily involves careful preparation, proper placement, and sealing the edges to create a secure and finished look. Based on standard practices and the steps provided, here's a breakdown of the process.
Getting a kitchen glass splashback "fixed" or installed correctly ensures it looks great and protects your wall effectively. The core process involves preparing the surface, securing the splashback, and sealing the edges.
Key Steps for Installation
Installing a glass splashback typically follows these crucial steps:
- Prepare and Peel: Ready the splashback and peel off its protective backing.
- Stick to the Wall: Carefully position and adhere the splashback to the desired area.
- Seal the Edges: Finish by sealing the perimeter to prevent moisture ingress and give a clean look.
Let's look at each step in more detail:
Step 1: Prepare and Peel
Before placing the splashback, ensure the wall surface is clean, dry, smooth, and free from grease or debris. The reference states:
- PEEL off backing: Make sure all corners are well protected from any hard surfaces.
This step involves removing the protective film from the adhesive side of the splashback. It's vital to handle the splashback with care during this process, especially protecting the edges and corners from bumps that could cause damage.
Step 2: Stick to the Wall
Accurate placement is key for alignment and appearance. The reference provides specific guidance:
- STICK on the wall: Place the bottom edge of the splashback to the rear of the hob, cooker, range or sink.
Carefully align the splashback with the desired position, typically centered behind a key appliance like the hob or sink. Once aligned, firmly press the splashback onto the wall to ensure the adhesive bonds securely.
Step 3: Seal the Edges
Sealing is essential for preventing water and grease from getting behind the splashback and for providing a neat, finished edge. The reference instructs:
- SEAL all edges: Use clear silicone sealant to seal around all four sides of the splashback.
Apply a continuous bead of clear silicone sealant around the entire perimeter where the splashback meets the wall and any adjacent surfaces (like countertops or cabinets). Smooth the sealant line for a clean, professional finish. This step is crucial for hygiene and durability.
By following these steps, your kitchen glass splashback will be properly installed, providing both protection and a stylish finish to your kitchen wall.
