To use your Lampe Berger for diffusion after lighting, you need to heat the burner correctly. Based on the provided information, the key steps involve a specific burning period followed by extinguishing the flame.
Using a Lampe Berger involves igniting the catalytic burner to start the purification and fragrance diffusion process. A crucial step after initially lighting the burner is the heating phase, which prepares the lamp for flameless operation.
Heating the Burner for Optimal Performance
After lighting the Lampe Berger's catalytic burner, you will see a flame. This flame should not be left burning throughout the diffusion process. Instead, its purpose is to quickly heat the ceramic burner stone.
Here's the specific step from the reference:
- "Let It Go like that for two minutes it's just heating up the burner."
During this two-minute period, the flame heats the burner stone to a high temperature. This heat is essential for the catalytic reaction that purifies the air and diffuses the fragrance without producing smoke or soot.
Blowing Out the Flame
Once the burner has been heated for the recommended time, you must extinguish the flame.
According to the reference:
- "after two minutes you want to blow it. Out."
Blowing out the flame signals the end of the heating phase and the beginning of the diffusion phase. The stone remains hot, allowing the catalytic process to continue flamelessly, safely diffusing the fragrance into the room.
The Result: Flameless Diffusion
Properly performing the heating and extinguishing steps ensures that your Lampe Berger operates as intended.
As mentioned in the reference:
- "But there's no soot or smoke."
Once the flame is blown out, the lamp will effectively purify the air and diffuse fragrance cleanly, without generating undesirable soot or smoke, as long as there is fuel in the lamp.
Quick Steps for the Heating Phase
For clarity, here are the actions based on the provided information:
- Light the burner: Ignite the catalytic stone.
- Wait for 2 minutes: Allow the flame to heat the burner.
- Blow out the flame: Extinguish the flame after two minutes.
This specific sequence ensures the lamp transitions correctly into its active diffusion mode, providing a clean and effective way to fragrance your home.
