Loading a Franklin tape gun involves threading the tape through the dispenser mechanism for easy application. Specifically, you need to get the tape through the trapdoor by holding it open and pulling the tape through it.
Here's a more detailed breakdown, based on common tape gun loading procedures (since specific "Franklin" models weren't explicitly detailed in the provided information, this is based on standard tape gun operation).
-
Open the Tape Gun: Most tape guns have a hinged side or mechanism to allow you to insert the tape roll. Open this up.
-
Place the Tape Roll: Put the roll of tape onto the dispenser, making sure the sticky side of the tape faces down and outwards.
-
Thread the Tape: This is the crucial step. Pull the loose end of the tape from the roll.
-
Trapdoor/Dispenser: Hold open the "trapdoor" or pressure plate (the piece that applies pressure to the tape when you're using the gun).
-
Pull Through: Thread the end of the tape through the opening between the roller and the metal guard (the "trapdoor"). Pull enough tape through so it extends past the cutting blade.
-
Close the Mechanism: Close the hinged side or mechanism to secure the tape roll in place.
-
Test: Dispense a small amount of tape to ensure it feeds smoothly and tears properly.
By following these steps, you should be able to load and use your tape gun effectively for sealing boxes or other packaging tasks.
