Pavers are placed by carefully preparing a base, laying the pavers in a desired pattern, and securing them with edge restraints and joint sand. Here's a breakdown of the general process, based on the reference provided:
- Establish a Starting Point: The video suggests using a flat, stable surface such as a house foundation as a starting point. This allows for creating a straight edge to work from.
- Laying the First Paver: The first paver is placed against the reference point (e.g., the house) and a guide (referred to as a "Big L" in the video) to ensure a square and accurate start.
- Building Out the Pattern: From the starting point, additional pavers are placed adjacent to each other, following the chosen pattern and maintaining consistent spacing.
While the video excerpt only provides limited information, a typical paver installation generally involves these steps:
- Excavation: Digging down to the required depth for the base materials.
- Base Preparation: Laying and compacting a gravel base to provide a stable foundation.
- Sand Bedding: Adding a layer of sand over the gravel base to create a level surface for the pavers.
- Paver Placement: Carefully placing the pavers in the desired pattern.
- Edge Restraints: Installing edging to prevent the pavers from shifting.
- Joint Sand: Sweeping sand into the joints between the pavers to lock them in place.
- Compaction: Using a plate compactor to further settle the pavers and sand.
