zaro

Summary of Post-Backplate Opening Steps

Published in Phone Disassembly 2 mins read

To physically open a Samsung Galaxy S20 for disassembly involves several steps, starting with removing the back cover. Following that initial step, the internal components become accessible, requiring further removal of parts like screws and internal modules.

While a complete guide to full disassembly requires details on removing the back cover itself (often involving heat and prying tools), the process continues with accessing components held by screws and connected modules.

Based on disassembly information, once the backplate is successfully removed, the next crucial steps involve removing specific fasteners and internal pads.

Here are the steps involved after the backplate has been removed, according to the provided reference:

  1. Remove Phillips Screws: After lifting off the backplate, you will typically encounter a number of small Phillips screws that secure internal shields or components. The reference specifically notes that there are 15 Phillips screws that need to be removed at this stage.
  2. Remove the Wireless Charging Pad: Following the removal of all the screws, the next step involves detaching or removing the wireless charging pad. This component often covers other parts or flex cables and must be carefully lifted or disconnected.

Summary of Post-Backplate Opening Steps

To access further internal components of the Samsung Galaxy S20 after the backplate is off:

  • Locate and remove all 15 Phillips screws.
  • Carefully detach or remove the wireless charging pad.

This process allows access to the logic board, battery, and other internal parts for repair or component replacement.

Important Note: Physically opening a smartphone like the Samsung Galaxy S20 requires specific tools (like screwdrivers, spudgers, heating tools, and prying tools) and technical knowledge. Attempting this without proper experience can damage the device.