To stop water in your wash basin, you need to close the drain using a plug or stopper. If the water is overflowing due to a plumbing issue, you will need to turn off the water supply to the basin.
Stopping Water Flow from the Drain
Most wash basins have a built-in mechanism to stop water from flowing down the drain. This is usually a:
- Plug: A physical object, typically made of rubber or plastic, that fits into the drain opening.
- Pop-up stopper: A lever-operated plug that moves up and down to allow or block water flow.
- Click-clack waste: A spring-loaded stopper that seals or unseals the drain with a push.
To stop water in your wash basin, use the method described above in line with your basins design.
Turning Off the Water Supply
If your basin is overflowing, there might be a problem with the plumbing, and you may need to turn off the water supply. Here's how you can do this:
Locate Your Stop Tap
The first step is to find your internal stop tap. According to the provided reference:
In most homes, this stop tap can be found under your kitchen sink, but in some properties, it can also be found in an airing cupboard if there is one, or even under the floorboards near the front door.
- Kitchen Sink: Check under the kitchen sink, where you'll often find the tap installed.
- Airing Cupboard: If you have an airing cupboard, it might be located there.
- Under Floorboards: In some cases, the stop tap is under the floorboards, typically near the front door.
Turn the Stop Tap Clockwise
Once you have found your internal stop tap, remember that:
turning it clockwise will close the valve.
- Turning the valve clockwise will shut off the water supply.
- Use gentle and steady pressure when turning the tap. Avoid forcing it if it doesn’t turn easily.
By turning the stop tap clockwise, you will shut off the water supply to the wash basin, preventing any further overflow and allowing you to assess the issue.
