You use Revive in a pool by attaching it to a garden hose, spraying the contents over the pool surface, waiting for debris to settle, and then vacuuming it out.
Understanding Revive! for Pool Cleaning
Revive! is a specialized pool treatment designed to clear debris and cloudy water, restoring your pool's clarity. Its application involves a straightforward process that culminates in debris removal and filter maintenance.
Step-by-Step Guide to Using Revive!
For optimal results, follow these instructions carefully to apply Revive! to your swimming pool:
-
Preparation:
- Begin by attaching a standard garden hose securely to the Revive! bottle. Ensure a snug fit to prevent leaks during application.
-
Application:
- Once the hose is connected, spray the entire contents of the Revive! bottle evenly over the surface of your pool. This step should be performed steadily, typically taking 5-7 minutes to ensure complete dispersion across the pool area.
-
Settling Period:
- After spraying, allow the treatment to work by waiting 24-48 hours. During this time, the active ingredients in Revive! will cause suspended debris and particles to coagulate and settle to the bottom of the pool.
-
Debris Removal:
- Once the debris has settled, slowly vacuum the pool to waste. It is crucial to vacuum to waste rather than through your filter to prevent clogging your filter with the heavy amount of settled debris.
-
Post-Vacuum Filtration:
- After thoroughly vacuuming the pool, run your pool filter for 24 hours continuously. This helps to further clear any remaining fine particles from the water.
-
Filter Maintenance:
- Following the 24-hour filtration period, perform a backwash of your pool filter. This cleans the filter media, removing trapped contaminants and restoring filter efficiency.
-
Resume Normal Operations:
- Finally, you can resume your pool's normal filtration schedule and chemical maintenance routines.
Revive! Application Summary
For a quick overview of the process, refer to the table below:
| Step | Action | Duration/Notes |
|---|---|---|
| 1. Connect Hose | Attach garden hose to Revive! bottle. | Ensure secure connection. |
| 2. Spray Pool Surface | Spray entire contents over pool surface. | 5-7 minutes. |
| 3. Allow Settling | Wait for debris to settle. | 24-48 hours. |
| 4. Vacuum Debris | Slowly vacuum settled debris to waste. | Do NOT vacuum through the filter. |
| 5. Run Filter | After vacuuming, run pool filter. | 24 hours. |
| 6. Backwash Filter | Perform a backwash of your filter. | Cleans filter media. |
| 7. Resume Normal Operations | Return to regular pool system run-times and maintenance. |
By following these steps, Revive! effectively cleans your pool, making it ready for enjoyment.
