How to Clean a Filter on a Pool Pump?

Cleaning your pool pump filter is a straightforward maintenance task that helps keep your pool water clean. Here’s a step-by-step guide on how to do it, incorporating information from provided references:

Steps to Cleaning Your Pool Pump Filter

Here are the steps you need to follow to clean your pool pump filter effectively.

1. Turn off the Power: Always begin by ensuring the power to your pool pump is completely turned off to avoid any electrical hazards.
2. Open the Filter Valves: You will want to open the valves on your filter. This will release pressure within the system.
3. Remove the Lid: Carefully remove the lid from the filter tank.
4. Remove the Cartridge: Take out the filter cartridge from the filter canister.
5. Prepare for Cleaning: Set the filter cartridge down in an area suitable for cleaning.
6. Inspect for Damage: Check the cartridge for any tears, cracks, or other damages. If damaged, it may need replacing.
7. Hose it Down: Thoroughly hose off the filter cartridge to remove dirt, debris, and algae.
8. Reassemble the Filter: Put the cleaned filter cartridge back into the canister and reassemble the filter.

Practical Insights

• Frequency: Clean your pool pump filter as often as needed depending on your pool’s usage. Generally, a good rule of thumb is cleaning the filter at least once a month.
• Inspection: Regularly inspect your filter for any tears, cracks, or damage. A damaged filter won’t effectively clean your pool water and may lead to other issues.

Additional Tips

• Deep Cleaning: For a more thorough clean, you can use a filter cleaning solution. However, ensure you rinse the filter thoroughly before reassembling it.
• Professional Help: If you’re unsure about any step, don’t hesitate to seek help from a pool maintenance professional.

By following these steps, you can effectively clean your pool pump filter and maintain a clean and healthy pool.