To hang wheels for powder coating based on the provided reference, you typically use a hook inserted into the valve stem hole. This method allows the wheel to be suspended for the powder coating and curing process.
Method for Hanging Wheels
The reference highlights a specific step in the process of preparing wheels for powder coating.
According to the provided information:
- Step Three: Load the wheel onto the hook.
- Place the hook right inside of the valve stem.
- Make sure that the wheel is securely hooked up in the valve stem hole.
This approach utilizes the existing valve stem hole in the wheel as a secure point to attach a hook. The hook then serves as the suspension point, allowing the wheel to hang freely for an even application of powder coat and subsequent curing.
Benefits of This Hanging Method
Using the valve stem hole can offer several advantages:
- It's a pre-existing feature, requiring no modification to the wheel.
- The hole is typically small, minimizing the area that needs to be masked or touched up later.
- Provides a central or easily accessible hanging point depending on the wheel design.
By following this method, as described in the reference, you ensure the wheel is properly suspended, which is crucial for achieving a professional and uniform powder coat finish.
