Measuring a motorhome window typically involves removing the old window and measuring the rough opening, sidewall thickness, and corner radius using a few specific tools.
To accurately measure for a replacement motorhome window, you will need to follow a few key steps after removing the old window. The process focuses on getting precise dimensions of the window's placement within the RV's structure.
Essential Tools
According to the reference, the only tools you will need to complete this measuring process are:
- A screw gun (presumably for removing the old window's fasteners)
- A tape measure
- A putty knife (likely for helping remove the old window or sealant)
Steps to Measure Your Motorhome Window
The measuring process, as outlined by the reference, involves these steps:
-
Step 1: Remove the old window.
- Before measuring, the existing window must be carefully removed from the opening in the motorhome wall.
-
Step 2: Measure the rough opening.
- Measure the height and width of the hole in the motorhome wall where the window was located. This "rough opening" is the critical dimension for the window's size.
-
Step 3: Measure the sidewall thickness.
- Measure the thickness of the motorhome wall itself at the window opening. This is important for determining the correct frame depth of the replacement window.
-
Step 4: Measure the corner radius.
- If the window opening has rounded corners, you need to measure the radius of those corners. This ensures the new window will fit snugly into the opening.
By following these steps and using the specified tools, you can obtain the necessary measurements to find a suitable replacement window for your motorhome. For further details on differentiating RV window sizes, you can refer to resources like Differentiating RV Window Sizes.
