The weight of an HPE DL360 Gen10 8SFF CTO (Configure-To-Order) server varies significantly based on its specific configuration, ranging from a minimum of 28.74 lb to a maximum of 37 lb.
Understanding HPE DL360 Gen10 Server Weight
The HPE ProLiant DL360 Gen10 is a versatile 1U rack server chassis, specifically the 8SFF (Small Form Factor) model, identified by part number P19766-B21. As a CTO server, its final weight is not static but depends on the components chosen during customization. This allows businesses to tailor the server to their exact needs, impacting its overall mass.
Here's a breakdown of the typical weight range for this server:
Specification | Weight (Approximate) |
---|---|
Minimum Weight | 28.74 lb (13.04 kg) |
Maximum Weight | 37 lb (16.78 kg) |
- Note: The minimum weight typically represents a base configuration with minimal components, while the maximum accounts for a fully loaded system.
Factors Influencing Server Weight
The final weight of a configured HPE DL360 Gen10 8SFF server is primarily determined by the following internal components:
- Processors (CPUs): Adding a second CPU (the server supports dual processors) significantly increases weight. Higher core count or more powerful CPUs can also add marginal weight.
- Memory (RAM) Modules: While individual RAM sticks are light, a fully populated server with many DDR4 DIMMs can contribute noticeably to the total weight.
- Storage Drives:
- NVMe SSDs: Typically lighter than traditional HDDs.
- SAS/SATA SSDs: Generally heavier than NVMe but lighter than HDDs.
- Hard Disk Drives (HDDs): Even though it's an SFF model, equipping it with multiple 2.5-inch HDDs will add substantial weight compared to SSDs.
- Power Supplies: The server supports redundant power supplies. Adding a second power supply, especially higher wattage units, will increase the overall weight.
- PCIe Expansion Cards: Components like network adapters (NICs), RAID controllers, or GPU accelerators, when installed in the PCIe slots, will also contribute to the server's final mass.
- Cooling Solutions: Upgraded or additional fans and heatsinks for high-performance configurations can also add weight.
For detailed technical specifications and configuration options for the HPE ProLiant DL360 Gen10 8SFF NC Rack Server Chassis, you can refer to product information available from www.expresscomputersystems.com.