Using Kiwi Select All Protector is a straightforward process designed to safeguard various materials from water and stains. The key is to apply it evenly to a clean surface and allow it to dry thoroughly.
Understanding Kiwi Select All Protector
Kiwi Select All Protector, often found in a 7.7 oz aerosol can, creates an invisible, breathable barrier on materials, offering protection against the elements. This protective layer helps repel water, prevent stains, and extend the life of your valuable items.
It is versatile and suitable for a wide range of materials, including:
- Footwear: Leather shoes, suede boots, fabric sneakers, and more.
- Bags: Handbags, backpacks, and luggage made of various materials.
- Outerwear: Jackets, coats, and hats.
- Other Accessories: Wallets, gloves, and similar items.
Step-by-Step Application Guide
Achieving optimal protection with Kiwi Select All Protector involves proper preparation, application, and drying.
Preparation
Before applying the protector, ensure the item is ready:
- Clean the Article: For best results, the item should be clean and dry. Remove any dirt, dust, or debris. For footwear, this might involve brushing off dirt or wiping with a damp cloth, then letting it air dry completely.
- Test in an Inconspicuous Area (Optional but Recommended): While Kiwi Select All Protector is designed for a wide range of materials, it's always a good practice to test on a small, hidden area first to ensure compatibility and no adverse effects on color or texture.
Application Process
Once your item is prepared, proceed with the application:
- Position the Bottle: Hold the Kiwi Select All Protector bottle upright, maintaining a distance of 6 to 8 inches away from the article you are treating. This distance ensures a wide, even spray pattern.
- Spray Evenly: Begin to spray the entire article, coating evenly. Use a consistent back-and-forth motion to ensure all surfaces are covered without missing spots.
- Do Not Saturate: It is crucial not to saturate the material. A light, even coating is far more effective than over-wetting the item, which can lead to uneven drying or residue. If you see droplets or a very wet surface, you've likely applied too much.
Drying and Curing
The final step is allowing the product to fully set:
- Allow to Dry: After application, allow the article to dry completely. The drying time can vary depending on humidity, temperature, and the material of the item, but typically ranges from several hours to overnight. Ensure the item is in a well-ventilated area.
For a quick reference, here's a summary of the application steps:
| Step | Action | Key Detail |
|---|---|---|
| Preparation | Ensure article is clean and dry. (Optional: Test in inconspicuous area.) | Clean surface is essential. |
| Application | Hold bottle upright, 6 to 8 inches away. Spray entire article, coating evenly. Do not saturate. | Even coat, appropriate distance. |
| Drying | Allow the article to dry completely. | Ensure full air drying before use. |
Tips for Best Results and Maintenance
To maximize the effectiveness and longevity of the protection:
- Reapplication: For continued protection, especially for items used frequently or exposed to harsh weather, reapply the protector periodically. The frequency depends on usage, but typically every few weeks to months is recommended.
- Ventilation: Always use the spray in a well-ventilated area, preferably outdoors, to avoid inhaling fumes.
- Storage: Store the Kiwi Select All Protector in a cool, dry place, away from direct sunlight and heat.
By following these simple steps, your shoes, bags, and other accessories will be better equipped to withstand the elements, keeping them looking newer for longer.
