How do you remove standing water from a shower drain?

To remove standing water from a shower drain, you can use a drain snake or a plunger.

Removing Standing Water From Your Shower Drain

If your shower is not draining properly, and you have standing water, it's likely due to a clog. Here are some methods to address the problem, based on the provided reference:

Using a Drain Snake

• A drain snake, also known as a plumber's snake, is a flexible tool designed to break up and remove clogs within your drain.
• To use it:
  1. Insert the end of the snake into the shower drain opening.
  2. Push the snake further down, maneuvering it through any curves in the pipe.
  3. Once you meet resistance, start twisting and pushing the snake to break up or catch the clog.
  4. Slowly pull the snake back out, along with the obstructing material.
  5. Repeat if necessary.

Using a Plunger

• A plunger can create suction that helps to dislodge clogs.
• To use it:
  1. Ensure there is enough water in the shower to cover the cup of the plunger.
  2. Position the plunger over the drain opening to create a seal.
  3. Push and pull the plunger vigorously to force water down the drain and dislodge the clog.
  4. Remove the plunger and see if the water starts to drain.
  5. Repeat if necessary.

These are common methods for removing standing water from a shower drain. The reference suggests using either a drain snake or a plunger to clear the blockage causing the backup.