How do you clean a Bissell easy vac?

While a complete cleaning of a Bissell Easy Vac involves multiple components, the cyclone within its dirt tank can be effectively cleaned using warm water and a mild detergent, ensuring it is completely dry before reassembly. This process is crucial for maintaining your vacuum's optimal suction and performance.

Understanding Bissell Vacuum Cleaning

To properly maintain your Bissell Easy Vac, or similar Bissell models, regular cleaning of its components is essential. The dirt tank, especially its cyclone part, is a primary area that accumulates dust and debris, directly impacting the vacuum's efficiency. The instructions provided below focus on cleaning the cyclone component, a critical part of the dirt tank assembly.

What is the Cyclone Component?

The cyclone is a key internal structure within your vacuum's dirt tank. It uses rapid airflow to spin dirt and dust away from the air stream, depositing it into the tank. Over time, this component can get coated with fine dust and debris, reducing its effectiveness and your vacuum's suction power.

Step-by-Step Guide to Cleaning the Cyclone

Follow these detailed steps to ensure a thorough cleaning of the cyclone in your Bissell vacuum:

1. Preparation and Disassembly:

   • First, unplug your Bissell Easy Vac for safety.
   • Remove the dirt tank from the main vacuum body. Refer to your specific model's user manual if you are unsure how to detach it.
   • Empty all accumulated dirt and debris from the dirt tank into a waste bin.

2. Cleaning the Cyclone:

   • Identify the cyclone component, which is typically a cone-shaped or cylindrical structure located inside the dirt tank.
   • The cyclone can be cleaned with warm water and a mild detergent. Prepare a solution of warm water and a small amount of dish soap or a similar mild detergent in a sink or basin.
   • Submerge the cyclone component in the soapy water. You may need to gently scrub it with a soft brush (like an old toothbrush) or a cloth to remove stubborn dirt, hair, and fine dust that cling to its surfaces. Ensure all crevices are clean.

3. Rinsing and Crucial Drying:

   • Rinse the cyclone thoroughly under clean, running warm water until all soap residue is completely gone and the water runs clear.
   • Let the cyclone completely dry before placing it back into the tank. This step is critically important. Air drying is the recommended method; allow ample time (at least 24-48 hours) to ensure no moisture remains. Placing a damp cyclone back into the vacuum can lead to mildew, unpleasant odors, or even damage to electrical components if moisture reaches the motor.

4. Reassembly:

   • Once the cyclone is fully dry, carefully place it back into its designated position within the dirt tank.
   • Close the bottom of the dirt tank securely, ensuring all latches or clips are fastened.
   • Reattach the clean and dry dirt tank to your Bissell Easy Vac.

Regarding Filters

In addition to the cyclone, Bissell vacuums typically contain various filters that also require regular maintenance. The reference notes, "To find the filters," indicating that they are part of the overall cleaning process. While specific cleaning instructions for filters are not provided in this context, it's essential to locate them in your Bissell Easy Vac and follow the manufacturer's guidelines for their cleaning or replacement, as dirty filters can severely impact suction power.

Cleaning Summary Table

Regular cleaning of your Bissell Easy Vac's cyclone and other components will extend its lifespan and ensure it continues to provide powerful cleaning performance for your home.