To remove the drawer from your washing machine, follow these simple steps. Based on the reference video from Hotpoint, here's how you can do it:
Steps to Remove Your Washing Machine Drawer
The drawer of your washing machine, also known as the dispenser drawer, is quite easy to remove for cleaning or maintenance. Here's how:
-
Pull the drawer out as far as it will go. You'll notice it stops at a certain point.
-
Locate the release catch. This is usually a small tab or button inside the drawer compartment.
-
While holding the release catch, give the whole drawer a firm tug. This should release it from its catch and allow you to fully remove the drawer.
- Note: The release catch might be located at the top, bottom, or sides of the drawer opening. Look closely to find it.
According to the reference video, "Side then give the whole draw a bit of a tug it'll release from its catch."
General Tips for Drawer Removal
- Be Gentle: Avoid using excessive force. If the drawer doesn't come out easily, double-check that you've located the release catch properly and are applying the correct pressure.
- Consult your Manual: If these steps don't work or you are unsure, refer to your washing machine's instruction manual. Specific models may have slightly different mechanisms.
- Clean Regularly: While you have the drawer removed, clean it to prevent buildup of detergent and mold. A toothbrush and warm soapy water are often enough to do the trick.
Example Table
| Step | Action | Detail |
|---|---|---|
| 1 | Pull drawer out | Extend drawer fully |
| 2 | Locate the release catch | This is typically a small tab or button; check the top, bottom or sides |
| 3 | While holding release catch, tug the drawer. | Firmly pull the drawer to release it. |
By following these steps, you should be able to remove your washing machine drawer easily and effectively.
