Creating a sunken water feature, such as a sunken fountain, primarily involves installing a water reservoir below ground level and setting up a pump system to circulate water. Based on the provided reference, the key steps revolve around placing the reservoir, installing the pump, and securing a cover.
Steps to Make a Sunken Fountain
A simple way to create a sunken water feature like a fountain is by using a pre-formed reservoir designed for this purpose.
Here's a breakdown of the process:
1. Prepare the Site
First, you need to dig a hole in the desired location that is large enough to accommodate your chosen reservoir. Ensure the bottom is level.
2. Install the Reservoir
Pop the reservoir in the hole and fill with water. This initial fill helps the reservoir settle correctly in the excavated space.
3. Position the Pump and Cable
Next, position the pump in the centre of the bowl (the reservoir). Then, carefully trail the cable up and over the side of the reservoir so it can be connected to a power source later.
4. Attach the Lid or Grill
Now, it's time to cover the reservoir. Attach the lid or grill over the reservoir. When doing this, make sure that the pump risers and head protrude above the central hole in the lid or grill. These parts are where the water will emerge to create the fountain effect.
5. Final Water Fill
With the pump and lid in place, the final step is crucial: then fill with water, ensuring the pump is fully covered. This guarantees that the pump has enough water to operate correctly and safely, preventing it from running dry.
Following these steps allows you to create a simple yet effective sunken water feature using a self-contained reservoir system.
