How to use Flood Wood Cleaner?

To use Flood wood cleaner effectively, you need to allow the product sufficient time to work on the surface and then rinse it thoroughly.

Using wood cleaner, such as the Flood Pro Series Wood Cleaner mentioned in the reference, involves specific steps to prepare wood surfaces for staining or other finishes. Proper application and rinsing are key to achieving a clean surface.

Steps for Using Flood Wood Cleaner

While the specific application method (like spraying or brushing) may vary by product and surface, the process after application generally follows these steps:

Application Time

After applying the cleaner to the wood surface, allow the product to penetrate and lift dirt, mildew, and grime. The crucial dwell time is:

• Let the product stand on the surface for five to ten minutes.

This allows the cleaner to break down contaminants effectively before rinsing.

Rinsing Process

Once the recommended time has passed, it's essential to remove the cleaner and the lifted debris completely. Thorough rinsing is vital to prevent residue that could affect subsequent finishes.

• Rinse thoroughly with water using your garden hose.

Ensure all cleaner is washed away from the surface.

Preparing for Finishing

After the cleaning and rinsing steps are complete, the wood surface must be properly dried before any finishing products like stain or sealant are applied.

• After the surface is thoroughly dry, it's ready for stain.

Allowing adequate drying time ensures that the stain or finish will adhere properly and perform as intended.

Summary Table: Flood Wood Cleaner Usage

Following these steps helps ensure a clean wood surface, ready for its next finish.